COG SHIP
Earliest ships Earliest Sailing Vessels Galleys Biremes Triremes Roman Galleys Dromons Lateen-Rigged Ships Junks Viking Ships Cog Carrack Caravel Galleon East Indiamen Ships of the Line Frigates, Sloops, and Brigs Clippers Last Days of Sail Fuel powered ships Paddlewheel Steamships Innovative Ships of the Late 19th Century The Screw Propeller Iron and Steel Hulls Double and Triple Expansion Steam Engines Steam Turbines Diesel Engines The Great Ocean Liners Cruise Ships Cargo Ships Container Ships Roll-On-Roll-Off and LASH Vessels Tankers Crude Carriers Product Tankers Other Specialized Tankers Tanker Safety Fishing Vessels Trawlers Seiners Long Liners Research Vessels Hovercraft Nuclear-Powered Vessels Naval Vessels Aircraft Carriers Battleships Cruisers Destroyers Frigates Mine Craft ship design
Aircraft carrier Barge Bulk carrier Cable Layer Capital ship Cargo ship Catamaran Coaster Container ship Corvette Crane vessel Cruise ship Cruiser Cutter Destroyer Diving support vessel Drillship Dredger Ferry Frigate Floating Production Storage and Offloading Guided missile cruiser Hopper barge, Split hopper barge Hovercraft Hydrofoil Icebreaker Jetfoil Junk Landing craft Lake freighter Livestock carrier LNG carrier Lugger Minesweeper minehunter Ocean liner Packet ship Panamax Passenger ship Reefer (refrigerated ship) Research vessel RO-RO ship (roll on, roll off, Auto carrier) Sailing ship Selfdischargers Semi-submersible Sloop Steamboat supertanker Supply boat, Supply ship Survey Vessels Tanker Tender Train ferry Tugboat Ultra Large Crude Carrier Very Large Crude Carrier Yacht
SUBMARINES Submersible Craft Torpedo (weapon)
Boats and Boatbuilding INTRODUCTION BASICS OF BOAT DESIGN Buoyancy and Weight Trim and Stability Structure Watertightness
SKIN AND BARK BOATS WOODEN BOATS Lapstrake Construction Carvel Construction Plywood Construction CANVAS-COVERED BOATS ALUMINUM BOATS FERROCEMENT BOATS FIBERGLASS BOATS MEASURING AND MODELING The Half-Model Lift Models and Lofting BOAT PROPULSION Inboard Motors Outboard Motors Water-Jet Drive Surface-Piercing Propeller
Motor-Boat Racing Rowing Yachting

A cog (or cog-built vessels) is a type of ship that first appeared in the 10th century, and was widely used from around the 12th century on. Cogs were generally built of oak, which was an abundant timber in the Baltic. This vessel was fitted with a single mast and a square-rigged single sail. Even though this type of rigging prohibited sailing into the wind, it could be handled by a smaller crew, which reduced operational costs. These vessels were mostly associated with seagoing trade in medieval Europe, particularly in the Baltic Sea region.

Cogs were characterized by a flush-laid flat bottom at midships but gradually shifted to overlapped strakes near the posts. They had full lapstrake planking covering the sides, generally starting from the bilge strakes, and double-clenched iron nails for plank fastenings. The keel, or keelplank, was only slightly thicker than the adjacent garboards and had no rabbet. Both stem and stern posts were straight and rather long, and connected to the keelplank through intermediate pieces called hooks. The lower plank hoods terminated in rabbets in the hooks and posts, but upper hoods were nailed to the exterior faces of the posts. Caulking was generally tarred moss that was inserted into curved grooves, covered with wooden laths, and secured by metal staples called 'sintels'. Finally, the cog-built structure could not be completed without a stern-mounted hanging central rudder, which was a unique northern development.

Cogs are first mentioned in 948 AD, in Muiden near Amsterdam. These early cogs were influenced by the Norse Knarr, which was the main trade vessel in northern Europe at the time, and probably used a steering oar, as there is nothing to suggest a stern rudder in northern Europe until about 1240.

Current archaeological evidence points to the Frisian coast, Western Jutland, as the possible birthplace of this type of vessel. The transformation of the cog into a true seagoing trader came not only during the time of the intense trade between West and East, but also as a direct answer to the closure of the western entrance to the Limfjord. For centuries, Limfjord in northern Jutland offered fairly protected passage between the North Sea and the Baltic. Due to unusual geographical conditions and strong currents, the passage was constantly filling with sand and was completely blocked by the 12th century. This change produced new challenges. Bigger ships that could not be pulled across the sand bars had to sail around the Jutland peninsula and circumnavigate the dangerous Cape Skagen to get to the Baltic. This resulted in major modifications to old ship structures, which can be observed by analyzing evolution of the earliest cog finds of Kollerup, Skagen, and Kolding.

Reconstructed excavated cog from 1380 at Deutsches SchiffahrtsmuseumThe need for spacious and relatively inexpensive ships led to the development of the first workhorse of the Hanseatic League, the cog. The new and improved cog was no longer a simple Frisian coaster but a sturdy seagoing trader, which could cross even the most dangerous passages. Fore and stern castles would be added for defense against pirates, or to enable use of these vessels as warships, such as used at the Battle of Sluys.

Eventually, around the 14th century, the cog reached its structural limits, resulting in the desperate need for a quick replacement. The replacement, the hulk, already existed but awaited reconditioning. Although there is no evidence that hulks descended from the cogs, it is clear that a lot of technological ideas were adapted from one to the other and vice versa.[3] The transition from cogs to hulks was not linear. According to some interpretations, both vessels coexisted for many centuries but followed diverse lines of evolution.


auuuu.com ©2010.